Ebara Pumps

ebara picture

The Ebara products shown below are exclusively now available through So Pure Enterprises.

So pure enterprises in proud to say they are now an official supplier of Ebara Pumps. The Ebara corporation was established in 1912 as a pioneer pump manufacturing company in Japan and now one of world largest pump supplier of full range of pump products. Ebara has grown to a multinational company with various manufacturing facility and sales office all over the world including Asia, Oceania, Middle East, Europe and Americas.

Pumps and pumping system being the core business of Ebara group, it has dedicated efforts of research and design to develop and produce equipment which are state of the art technology and at the same time environment friendly.

EVMS

Ebara vertical multistage inline pumps designed with cutting edge technology available in AISI 304 version (EVMS), AISI 316 version (EVMSL) and version in cast iron bottom casing but hydraulic parts in AISI 304 (EVMSG).


Technical Data :

Flow          :  0.5 to 24 mᶾ/hr

Head         : 220 to 14 m

Motor       : 0.37 to 18.5 kW

Speed       : 2,900 rpm

Liq. Temp : -30 to 140 °C – 1ph & 3ph, 50 Hz.

Applications:

Water filtration, reverse osmosis, clean water pressure boosting for high rise buildings, boiler feed, sprinklers and irrigation.


Main product features :

  • Innovative impeller design reduces axial thrust which results to long bearing life of motor and pump
  • Energy saving with high efficiency IE3 motor complied with the EuP 2005/32/EC and ErP 2009/125/EC directives
  • Multiple connection options
  • Easy maintenance with cartridge type mechanical seal and spacer coupling
  • Pressure resistant parts and shaft
  • Multiple smart plug solution.
  • Any motor, anywhere. Commercial IEC standard motors of any make can be fitted to EVMS pumps without any modifications.

evms pumps logos

3dl pumps

Standardized centrifugal electric pumps in compliance with EN 733 (Former DIN 24255) built in AISI 304 (3 Series) and AISI 316 (3L Series).


Technical Data :

Flow     : 8 to 200 mᶾ/hr

Head   : 90 to 8 m

Motor  : 1.1 to 55 kW

Speed  : 2,900 rpm

Flow     : 4 to 100 mᶾ/hr

Head    : 22 to 5 m

Motor  : 0.25 to 7.5 kW

Speed  : 1,450 rpm

Liq. Temp : -10 to 90 °C – 1ph & 3ph, 50 Hz.

Applications :

Pumping clean water for buildings, commercial complexes, fire-fighting, industries, water treatment plants, commercial laundry machines, packaged unitary refrigeration systems and HVAC systems and irrigation.


Main product features :

  • Volute casing is made through a patented process called “Hydroforming”. This process offers a volute with the absence of welding which offers higher efficiency and good corrosion resistance.
  • Micro-casted impeller design reduce vibration and offers low NPSH
  • Energy saving with high efficiency IE3 motor complied with the EuP 2005/32/EC and ErP 2009/125/EC directives
  • Back pull-out design allows impeller, bracket and motor to be extracted without disconnecting the pump body from the piping for easy maintenance.
  • Standard EN 12756 Mechanical seal allowing the installation of various type of shaft seal depending of liquid, temperature, etc.

Standard dimension according to ISO, DIN standard

3 Series Logos

3d series

Standardized centrifugal electric pumps in compliance with EN 733 (Former DIN 24255) in cast iron.


Technical Data :

Flow      : 8 to 110 mᶾ/hr

Head     : 67 to 8 m

Motor  : 1.1 to 2 kW

Speed   : 2,900 rpm

Flow      : 4 to 55 mᶾ/hr

Head     : 18 to 2 m

Motor   : 0.25 to 3 kW

Speed   : 1,450 rpm

 Liq. Temp : -5 to 90 °C

1ph & 3ph, 50 Hz.

Applications :

Water supply, industrial pressure sets, transfer of liquids systems, HVAC systems (heating, ventilation and air conditioning), and irrigation.


Main product features :

  • Cast iron body EN-GJL-250-EN 1561 .
    • Stamped stainless steel impeller
    • Energy saving with high efficiency IE3 motor complied with the EuP 2005/32/EC and ErP 2009/125/EC directives
    • Back pull-out design allows impeller, bracket and motor to be extracted without disconnecting the pump body from the piping for easy maintenance.

Standard dimension according to ISO, DIN standard

3 Series Logos-2

cmd series

 

 

 

 

Single impeller centrifugal electric pumps in cast iron available in close and open type impeller.


Technical Data :

Flow          : 1.25 to 65 mᶾ/hr

Head         :  55 to 6 m

Motor       : 0.37 to 2.2 kW

Speed       : 2,900 rpm

Liq. temp : 5°to 90°C – 1ph & 3ph, 50 Hz

Applications :

Drinking water, domestic water boosting and irrigation, washing plants, emptying small reservoirs and swimming pools.

 Construction :

Casing : Cast iron

Impeller : PPE and Brass in various sizes


Main product features :

    • Maximum operating pressure of 6 bars to 8 bars
    • Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor
    • Energy saving with high efficiency IE3 motor starting from 0.75 kW
    • Open impeller type available in CMR model

3 Series Logos-2

Download PDF

pump5Horizontal Multistage centrifugal pump in sturdy and compact construction built in AISI 304.


Flow         : 1.25 to 24 mᶾ/hr

Head        : 90 to 10 m

Motor      : 0.45 to 4 kW

Speed       : 2,900 rpm

Liq. temp : -15 to +110°C – 1ph & 3ph, 50 Hz.

Applications :

Pumping clean water for pressure boosting, water distribution and treatment, industrial washing equipment, heating and conditioning and irrigation.


Main product features :

  • Pump design to handle up to 10 bars max working pressure combined to high performance of fatigue
  • Extensive model range available with different number of stages to meet various capacity and head requirement
  • Energy saving with high efficiency IE3 motor
  • Special bearing force reduction design for long bearing life
  • All pump parts in contact with liquid is in stainless steel
  • Floating liner ring in PTFE

3 Series Logos

Download PDF

pentam

Horizontal end suction pump for highly aggressive and corrosive liquid application built in high resistance resin “PENTAM” formed through a unique technique called ZEON-RIM.


Flow          : 5.4 to 360 mᶾ/hr

Head         : 40 to 10 m

Motor       : 0.7 to 30 kW

Speed       : 1,450 rpm

Liq. Temp : -5 to +80°C – 3ph, 50 Hz

Flow           : 3 to 240 mᶾ/hr

Head          : 17 to 6 m

Motor        : 0.4 to 11 kW

Speed        : 960 rpm

Applications :

Pumping sea water, hot spring water, acids, chlorides and corrosive liquids. Widely used in fish farms, marine, chemical and fertilizer industries.

Construction :

Casing : PDCPD

Impeller : PDCPD or stainless steel


Main product features :

  • Highly resistance to acids, sea water and other liquids that corrode stainless steel.
  • High efficiency comparable to casted metal pump and the ability to build to particular user requirement.
  • The pump can cope up with variation in suction heights specially model FPSQ
  • The plastic’s highly elastic properties ,together with the absence of fiberglass reinforcement means high resistance to abrasion by sand or slurry contents
  • As the plastic has the property of hardening in response to heat, the pump will never seize as a result of heat resulted due to friction when any foreign matter comes in contact with the rotor
  • Easy maintenance thanks to light weight , Back-pull out design that permits disassembly of the major compenents without removing the pipe work
Download PDF

MS Series

Horizontal multistage pump in unique double volute construction built in cast iron.


Flow         : 6 to 150 mᶾ/hr

Head        : 120 to 13 m

Motor      : 1.5 to 55 kW

Speed       : 1,450 rpm

Liq. Temp : 0 to 80°C – 3ph, 50 Hz

Flow          : 4.2 to 72 mᶾ/hr

Head         : 260 to 85 m

Motor       : 7.5 to 75 kW

Speed       : 2,900 rpm

Liq. Temp : 0 to 80°C

3ph, 50 Hz

Applications :

Clean water pressure boosting for high rise buildings, boiler feed, water filtration, reverse osmosis, sprinklers, irrigation and mining. 

Construction :

Casing : Cast iron

Impeller : SS 304 & Bronze


Main product features :

  • Ebara’s unique double volute construction provides higher operating efficiency over a wide range of capacities than conventional pumps equipped with guide vane.
  • Double volute casing is designed to balance radial forces at all ranges of operation. Axial force is absorbed by a balance-disk which has a wear indicator at the shaft end.
  • Wide range caters for various high pressure applications.
  • The pumps are compact, lightweight and they operate with minimum noise.
  • Pumps are fully standardized to ensure easy servicing and maintenance.
Download PDF

pump7Single stage, end suction centrifugal process pump designed as per ISO 2858 available in various material configurations mainly for petroleum refinery and chemical industry.


Flow          : 9 to 240 mᶾ/hr

Head         : 145 to 15 m

Motor       : 1.5 to  160 kW

Speed       : 2,900 rpm

Liq. Temp : -50 to +200°C – 3ph, 50 Hz

Flow          : 9 to 1080 mᶾ/hr

Head         : 80 to 4 m

Motor       : 0.4 to 315 kW

Speed       : 1,450 rpm

Applications :

Pumping aggressive liquids such as sea water, brackish water, hot spring water, oils and chemicals. Widely used in chemical and petrochemical industry.


Main product features :

  • Full compliance with ISO 2858 specifications.
  • Low NPSH operation
  • Flexibility of design caters to a wide range of liquid specifications.
  • Easy maintenance due to its “Back Pull-out” construction which permits disassembly and inspection without removing the suction and discharge pipes.
Download PDF

pump8Horizontal long coupled end suction pump designed for handling liquids containing slurry particles in hardened cast iron and duplex stainless steel materials.


Flow         : 4.8 to 450 mᶾ/hr

Head        : 33 to 4.5 m

Motor      : 0.75 to 55 kW

Speed       : 1,450 & 960 rpm

Liq. Temp : 0 to 80°C – 3ph, 50 Hz

Applications :

Pumping slurry liquids containing particles in chemical, paper & pulp, sugar / salt manufacturing industries.


Main product features :

  • Special wear resistant cast iron is used for the casing and impeller to offer high wear resistance
  • The limit load characteristics of the specially designed pumps control horse power regardless of the pump flow
  • The effect of the rear vane of impeller reduces leakage from the gland packing
  • The direct coupled type pumps that ensure stable operation.
  • Low energy consumption and yet highly efficient.
Download PDF

PUMP9Horizontal End Suction Pump in casted stainless steel construction for aggressive liquid application.


Flow          : 3 to 300 mᶾ/hr

Head         : 140 to 5 m

Motor       : 0.37 to 132 kW

Speed       : 2,900 rpm

Liq. Temp : -40 to +150°C – 3ph, 50 Hz

Applications :

Pumping aggressive liquids such as brackish water, hot spring water, oils and chemicals. Widely used in chemical and petrochemical industry.


Main product features :

  • Wide range of application due to standard configuration in 304 stainless steel with option in 316 stainless steel and higher grades.
  • Easy maintenance BPO (Back Pull Out) feature allows rotating element to be removed without disconnecting the suction and discharge pipe work.
  • Top centerline discharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads.
  • Non-overload design, to ensure stable performance for all applications.
Download PDF

Leave a Reply

Your email address will not be published. Required fields are marked *